Ruger LC9s & EC9s Trigger Spring Kit

My kit came in yesterday’s mail, I decided to do the installation immediately. The trigger pull was a shade over 5# on my 8 year old LC9 s Pro. The first 2 spring were the easy part after watching your video I think I could do it again blindfolded. Remember to have the tools recommended in video if you improvise you will have more difficulty and possibly cause damage.
Then it was time to do the trigger spring taking the mechanism from the plastic pistol body is simple , a few parts fell off and I had to use the video to make sure I reinstalled in proper location, since the Pro doesn’t have a safety remember to not look for the parts there not there but the spot for them are don’t let it confuse you. I has difficulty keeping that tiny spring that is in the trigger safety bar in the correct position during reassembly, I found that you must let gravity be your 3rd pair of hands in doing the installation. I had all the new parts properly installed after around 20 minutes. I then went to put the barrel slide back on and there was a pin that secures the rail to the frame that was blocking the track. I just had to tap it back into position and the assembly was complete.
I took out my trigger gauge and it’s just as advertised I got a 2# drop and it’s at around 3# with every pull I’ll go to the range shortly to sell how it feels in action. But from dry firing I which I knew about this upgrade years ago. My Ruger is what I call my dress concealed carry pistol as it the smallest one I have with some guts. I don’t have faith in my 380. When I’m in areas that have the potential to be a problem i carry a compact 45 . But fortunately in the 40+ years I’ve been carrying I’ve never had to draw but I’ve always worked on being a better marksman especially as you get older you can’t rely on your fists like you could in the past. Hopefully not having to use my firearms in defense continues but I’m ready if it’s needed . Remember to carry because the bad guys never forget.

This is my second spring kit I’ve ordered from MCARBO. The first was for a Marlin Model 60 22LR that performs perfectly! The second one was for a Ruger EC9s. Again, it performs perfectly as well. Great products at a great price that work as advertised! I would recommend their products to anyone looking for quality products and parts! Thanks MCARBO!

Watched the install video a couple of times, took about 30 minutes to install. Trigger pull is light and smooth very good product and video that makes it easy.
Recommend this item.

After installing the 3 springs, I am experiencing soft striks on bullet. About 1 and sometimes as many as 3 miss fires.
I am confident this problem will get resoved.

All I had to do is watch the video, which was very well done and covered everything that you need to do from the necessary tools and even everything that could go wrong. The trigger pull is a lot smoother with a much less gritty feel to it. Thanks!

Awesome dropped trigger pull to 3lbs

Trigger spring break is remarkably better than the original. More precise trigger break and reset, makes a better shooting experience and grouping has greatly increased

@jolietjarhead
1 day ago
I just completed this upgrade. Awesome instructions. Issues I encountered had nothing to do with your instructions.
1. I found that my punch was NOT 1/16 when it did not fit to pull the pin for the striker bar safety. I used a pointy thin piece of metal to remove it.
2. Putting the cove back on the back I missed the multiple references to the "Striker Bar Sleeve" and only looked at the video (12:54) and ASSUMED I should push on the middle if the sleeve vs the edge. Once I figured that out I was golden.
I am not a gunsmith by any means of the imagination but I am mechanically inclined. It felt great doing my own upgrade.

I ended up purchasing a punch set and block from you and patiently waiting for the items to complete the upgrade. The punch set I received from you was correctly sized for 1/16th ! Can't wait to go to the range!