- Precision CNC Machined Peek High-Performance Thermoplastic Replacement Buffer that won't Melt or Deform under
intense Heat & Pressure! Will outlast the factory buffer that melts.
- Corrects one of the major KEL-TEC PMR-30 Problems with the Factory Rubber Buffer Melting and Deforming under
extreme heat from barrel after repeated firing and impact from Barrel Block!
- PEEK High-Performance Buffer can Take the Heat and Handle the Beating! Will maintain proper buffer thickness to
ensure reliable cycling operations of the PMR-30.
- Maintains Proper Buffer Thickness over thousands of rounds to promote desired timing of slide that
will ensure reliable Feeding Operations for your PMR 30.
- PMR-30 Peek Performance Buffer is resistant to chemicals and continuous operating temperatures up to 480°
F.
- Immediate KEL TEC PMR 30 Reliability Improvement with Improved Cycling Operations!
- PMR-30 Heavy Duty Takedown Pin is CNC Machined from 4140 Carbon Steel and Heat Treated for Increased Strength
and Wear Resistance that far exceeds the factory pin.
- Increased Takedown Pin Thickness with Improved Design that will Lock and Unlock from Recoil Spring & Guide Rod
Assembly.
- Peek Performance Buffer is a Heavy Duty Alternative that requires the Heavy Duty Takedown Pin Replacement.
Designed & Intended to be used together. *Not sold separately as they will not perform as
intended.*
- Protected by the M*CARBO 100%
Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
- Will only Fit & Function on KEL TEC PMR 30.
- PMR-30
Installation Services Available
WHAT'S IN THE KIT:
- 1 - CNC Machined PEEK Performance Buffer
- 1 - CNC Machined 4140 Heat Treated Heavy Duty Takedown Pin
KEL-TEC PMR-30 PEEK Performance Buffer & Heavy Duty Takedown Pin Upgrade Bundle:
Enhance the reliability and functionality of your KEL-TEC PMR-30 with this state-of-the-art PEEK Performance Buffer & Heavy Duty Takedown Pin Upgrade Bundle, precisely CNC machined by M*CARBO.
Crafted from high-performance thermoplastic, this buffer stands the test of time. Unlike the factory buffer, which is prone to melting and deformation, our Peek buffer can handle the intense heat (up to 480°F) and pressure without compromising its structural integrity.
A common concern among PMR-30 owners is the factory rubber buffer's vulnerability to melting from the barrel's extreme heat, especially after repeated firing. Our Peek buffer will maintain the proper buffer thickness to ensure consistent cycling operations for the PMR-30.
Our takedown pin, made from 4140 carbon steel, is not just any pin. It's heat-treated for added strength and resistance, outshining the factory pin in durability and functionality. The enhanced design ensures a firm lock and easy unlock from the Recoil Spring & Guide Rod Assembly. These two components are designed and intended to function together, ensuring optimized performance and reliability. They are inseparable because individually, they won't deliver the desired outcome.
If you're looking for a comprehensive solution to KEL-TEC PMR-30's known reliability concerns, the PEEK Performance Buffer & Heavy Duty Takedown Pin Upgrade Bundle is your definitive answer.
KEL-TEC PMR-30 Resources:
If you're getting the KEL-TEC PMR-30 PEEK Performance Buffer & Heavy Duty Takedown Pin, then you might find the following KEL-TEC PMR-30 Resources useful in further enhancing your firearm. Download the PMR 30 Owners Manual or use the Exploded View of the PMR 30 Parts Diagram to plan your next firearm project.
Tested and Approved:
The KEL-TEC PMR-30 PEEK Performance Buffer & Heavy Duty Takedown Pin Upgrade Bundle has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC PMR-30 PEEK Performance Buffer & Heavy Duty Takedown Pin Upgrade Bundle. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
PMR
Had a lot of issues with my PMR out of the box.
I've purchased all the upgrades.
Runs like a sewing machine now!
Thanks guys!
New Buffer and Pin
I received my order quickly. The new buffer took a little fitting with a needle file. I removed the slightest material and was able to install it. It would not go in far enough to allow the recoil spring to fit where it needed to be. But it works great very pleased. Thank you for your quick response!
The pin fits perfectly and I like the slot head for indexing it. It fits better than original.
Decent upgrade
I have dumped easily 1000 rnds prior to the switch and noticed within the first couple of range days the stock buffer was wearing down. Have shot a couple hundred since and besides normal heat discoloration, it has held to its description. No safe queens here, very rough with my firearms. Well satisfied.
RecoilSpring, buffer, mag release, stainless feed ramp and alum frame insert - installed but does not run ungraded to M*Carbo install with hope
I ordered and received the RecoilSpring, buffer, mag release, stainless feed ramp and alum frame insert - installed following the video, so after about 3 hours of slow and careful work, including chasing the mag release spring, and surprisingly little trouble installing the recoil spring on the guide rod with that teeny squash spring clip, it all came together nicely at the end and….. it does not run.
Runs worse than ever. Jams every 2-3 shots hanging open like an empty mage, failure to pi’s I up a shell, and closing on an empty chamber, and failure to fire from a light strike, and I two pill not drop the slide after last shot hold open by pulling back on the slide.
Soooo, I upped my game, and bought the M*CARBO install.
Sent the whole gun in with the installed parts for M*CARBO to troubleshoot and “re-install”.
I have hope M*CARBO can redeem this disappointment.
RecoilSpring, buffer, mag release, stainless feed ramp and alum frame insert - installed but does not run ungraded to M*Carbo install with hope
I ordered and received the RecoilSpring, buffer, mag release, stainless feed ramp and alum frame insert - installed following the video, so after about 3 hours of slow and careful work, including chasing the mag release spring, and surprisingly little trouble installing the recoil spring on the guide rod with that teeny squash spring clip, it all came together nicely at the end and….. it does not run.
Runs worse than ever. Jams every 2-3 shots hanging open like an empty mage, failure to pi’s I up a shell, and closing on an empty chamber, and failure to fire from a light strike, and I two pill not drop the slide after last shot hold open by pulling back on the slide.
Soooo, I upped my game, and bought the M*CARBO install.
Sent the whole gun in with the installed parts for M*CARBO to troubleshoot and “re-install”.
I have hope M*CARBO can redeem this disappointment.
Very well made
Very easy to install, a great upgrade for that anyone can do.
buffer and spring
I had a little trouble installing at first until I found some gunk, technical term, in the seating holes. Once I cleaned all of the area well everything seated as it should and it worked well. I have also installed the ramp ,the mag latch and the slide lock. I still had a bit of a feed issue but I think I finally figured that out also. It seems the dumba** that installed these items, ME, had the screws to tight causing the slide to drag. WHAT A GOOF! I will see if all works better at the range. It is not always the parts, sometimes its the mechanic.
Didn't help
After installing buffer pmr 30 still jams
I am dissapointedin this gun I have bought almost all your upgrades for it and I am still having alot of jamming issues
The only upgrade I have left to get is your feed ramp which will be next Then off to gunsmith After that I will have over 1000 dollars in this 450 dollar pistol
If that dosent help I will be selling the gun
Why can't you buy just the buffer if you've already done the upgrade kit?
Will this also fit the CMR-30?
Will this also fit the CMR-30?
Will this pin work with the CP33?
How long will this last before you will have to replace it
There's no accurate timeframe for the longevity of the buffer. It depends on how much you shoot, what ammo you're using and etc.
Over a year ago i got the original KEL-TEC PMR-30 ALL IN ONE upgrade, so factory buffers never stood a chance! Glad to see an alternative. So the upgraded pin is required for the new plastic, then what? Can i no longer run factory buffers? Once the upgraded buffer is shot i gotta buy another pin?
$60 for a small piece of plastic and a simple pin?
Funny that the Aluminum frame support is machined aluminum and is only $12!
What is the justification for charging so much?
Hello! Thank you for reaching out about this! When pricing items, we consider a lot of factors including material costs, labor and packaging as well as being able to provide a Quality Part at a price that logically is feasible for us to produce and for customers for purchase. Unfortunately the price for a lot of materials has risen since the outbreak if COVID. Feel free to reach out at anytime via email for any product questions, sale inquiry and more! Help@mcarbo.com
Peek isn't just a simple plastic like delrin, it is very expensive even for small quantities, a 1 inch round bar 1 foot long can easily go for nearly 1,000 dollars, 6061 aluminum on the other hand is tremendously cheaper, a bar of similar size can easily bought for less than 20 dollars
Answered by
/
March 15, 2022 9:39 PM
Look up the prices on PEEK plastics , as well as how difficult it is to machine, that'll answer your question
Answered by
/
March 11, 2022 6:29 PM
CUSTOMER SERVICE and a better part for the weapon. Also the reputation of this company.
Answered by
/
February 25, 2022 3:31 PM