WHAT'S IN THE KIT:
- 1 - Custom Lighter Sear Spring
Browning A-Bolt/A-Bolt II Trigger Spring Kit
The M*CARBO Browning A-Bolt/A-Bolt II Trigger Spring Kit will give you the Best Browning A-Bolt Trigger Job on the market! With a nearly 40% Browning A Bolt Trigger Adjustment, you can reduce your trigger pull from a stock 3.5lbs to a modified 2lbs (average results may vary up to +/- 1lb). This custom lighter sear spring is made from the highest quality American spring steel - ASTM A228 Music Wire for the most reliable and durable performance.
Improve your accuracy and overall rifle performance with the Browning A Bolt Trigger Replacement Kit. You don't need to overpay for an Aftermarket Trigger when you can get superior results for less with the M*CARBO Browning A-Bolt/A-Bolt II Trigger Spring Kit. This is the best aftermarket Browning A Bolt Trigger Mod available.
Our kit functions in all Browning A-Bolt and A-Bolt II models and calibers. Watch our How to adjust trigger on a Browning A-Bolt Video to get your Browning A-Bolt Trigger adjusted in less than 30 minutes. You deserve the finest Browning A Bolt Trigger Pull available, so get the M*CARBO Browning A-Bolt / A-Bolt II Trigger Spring Kit today!
Current Browning Serial Number System
A-Bolt
2G7=Gold Medallion
217=Medallion
L17=Medallion Left Hand
2M7=Micro Medallion
717=Hunter
E17=Euro-Bolt
7S7=Stainless Stalker
LS7=Stainless Stalker Left Hand
7C7=Composite Stalker
A-Bolt II
351=All A-Bolt II Centerfire Rifles
3G7=Gold Medallion
317=Medallion
K17=Medallion Left-Hand
3M7=Micro Medallion
H17=Eclipse
8S7=Stainless Stalker
KS7=Stainless Stalker Left-Hand
8C7=Composite Stalker
817=Hunter
Browning A-Bolt / A-Bolt II Resources:
If you're getting the Browning A-Bolt/A-Bolt II Trigger Spring Kit, then you might find the following Browning A-Bolt Resources useful in further enhancing your firearm.
Drop Tested and Approved:
Browning A-Bolt / A-Bolt II Trigger Spring Kit is drop Tested according to SAAMI Standard Z299.5 rating (12" & 48").
Tested and Approved:
The Browning A-Bolt / A-Bolt II Trigger Spring Kit has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the Browning A-Bolt / A-Bolt II Trigger Spring Kit. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
M.CARBO Browning Abolt trigger spring
Spring installed in less than 10 minutes with a 60% reduction in trigger pull from 3.5 lbs to 1.6 lbs. Fantastic for the money. I highly recommend this product.
Excellent!
Installation was very easy. Reduced trigger pull from 4.9 to 1.9# . I would recommend this to anyone looking to increase the accuracy of your rifle!
Good to Go .
Check serial # for correct item, ordered and watched the install video. Swap took less than 5 minutes. Trigger pull vastly reduced but not too touchy. Tightened up my groups at the 150 yards mark with same ammo.
M*Carbo made this easy.
Great replacement for the original spring
Easy to install and made a world of difference. Accuracy improvement turned my Browning A- bolt into a tack driver. Highly recommended.
Quick Trigger Job
Installed the trigger spring on my M1000 Eclipse in 300 Win Mag. It had a factory trigger at 4.5 lbs after installation 2.5 lbs. I watched the install video, awesome video, and installed it no problems. The serial number charts are another great tool. Made selecting the right spring easy. Thanks folks for all the up front leg work.
Better Shooting
Price is great, install is easy( u tube ).Results are fantastic, adjusted to an average pull of 1.4, could be less, but is great for me.
Trigger spring replacement
I have now replaced factory springs on 4 rifles with the Mcarbo spring kit. Two Tikkas, one older model Savage 110 and a Browning Abolt and all I can say is WOW!. Took all from factory 4 to 6 lbs down to 1.5 lb and it was quick and easy to install. It has made a huge difference in my shooting groups for load development and for a lot less money than replacing the whole trigger assembly or what a gunsmith would charge. Just do it, it’s a no brainer.
Way better!
Have had this abolt for 20 years. Never liked the trigger. Went from 4.5 down to 1.8 lbs. very pleased. This is a game changer. Install was easy. Videos are great! Have one in my Tikka as well . Works great. I’d check these out before I did a much more expensive replacement trigger.
Does the A bolt spring listed also fit the A Bolt shotgun slugger?
Does the A bolt spring listed also fit the A Bolt shotgun slugger?
Was my order placed
Send an email to verify your order, at help@mcarbo.com.