Need assistance? Call our experts: (727) 223-1816 or visit support.mcarbo.com

M*CARBO Ruger LCP MAX Trigger Spring Kit Labeled

Ruger LCP Max Trigger Spring Kit (200033115999999)

4.69 stars, based on 32 reviews
Ruger LCP MAX Trigger Spring Kit Custom Designed Ruger LCP MAX 380 Spring Kit to correct common Ruger LCP MAX problems. Includes Two Hammer Spring Options: a 10lb Spring and a 12lb Spring. The 10lb Spring will result in a roughly 2.5lb pull...

Rating:
review-star review-star review-star review-star review-star

Review

The spring kit was easy to install on the Ruger LCP2 Max. Much easer than the LCP2. Made a much easer and smoother trigger pull.

**Great quality perfect fit and finish

Rating:
review-star review-star review-star review-star review-star

Review

Video is great, everything worked great, reduce pull, no ping

Fast shipping always, highly recommended

Add this to the Trigger Kit!

Rating:
review-star review-star review-star review-star review-star

Review

If you want the best possible experience you should swap your spring kit and trigger out. This is a very simple process that makes a world of difference to the trigger pull and reset.

Add this to the Trigger Kit!

Rating:
review-star review-star review-star review-star review-star

Review

If you want the best possible experience you should swap your spring kit and trigger out. This is a very simple process that makes a world of difference to the trigger pull and reset.

Better Group with the little gun than I ever thought possible. Took about 12 shots and things smooooothed out.

Rating:
review-star review-star review-star review-star review-star

Review

Put the springs in and the HARD cross pen. Was told that things might be ruogh feeling for a mag or 2 . 2 Mags and I was in HEAVEN.

Excellent as always

Rating:
review-star review-star review-star review-star review-star

Review

Just received the trigger and spring kit for my LCP Max. Followed the installation video, and 20 minutes later was done. The build quality and tolerances are top notch as always, and the sound dampening of the springs and the adjustable trigger reset really make it a whole new pistol! As the title says, excellent as always. Keep up the great products!

Excellent spring kit

Rating:
review-star review-star review-star review-star review-star

Review

Easy to install. Greatly reduced trigger pull and a bonus of no more spring twang.

Excellent upgrade, Excellent instructional Video!

Rating:
review-star review-star review-star review-star review-star

Review

Following the installation video, I installed the upgrade kit with no problem. My LCP Max shot well at the range after the upgrade; trigger pull went from avg. 7.95# to avg. 5.1# with the 10# hammer spring (avg. 6.7# with the 12# spring). I am well pleased with the result! As an engineer, I really appreciate the striker installation tool included with the kit, it made a tricky bit of the work a lot easier - outstanding customer focus!



One unintended consequence that may play out as troublesome for some, but not for me...(I am not complaining about the product, to be clear). With the lighter MCARBO firing pin spring, the firearm would not function with my laser training cartridge at home. Pull the trigger and the laser illuminated, but would not shut off until I rack the firearm. As one might imagine, the software went nuts when the laser did not shut off - it kept registering another 'shot' every half second or so until I shut off the laser or swung the muzzle off the laser target.



It took a bit of time to narrow the problem with the laser cartridge down (and I love to troubleshoot, so this was fun), but once I removed the MCARBO firing pin spring and re-installed the OEM spring, the laser cartridge resumed working as normal - I get the proper 'blink' of laser light when the trigger is pulled, and the software registers the 'shot' as normal. The OEM firing pin spring is significantly stronger and longer than the MCARBO spring, so this all makes sense. With the OEM firing pin spring my trigger pull with the 10# hammer spring went up a bit (0.7#) to avg. 5.8#, which is still a nice improvement. I will probably leave the OEM spring in place for now since winter is closing in on us here and I'll be doing more indoor practice for a while. I may try to find an 'in between' spring on my next visit to my favorite hardware store that still stocks a few hundred springs.



Keep up the great work brothers!

Finally! This is the way!

Rating:
review-star review-star review-star review-star review-star

Review

This spring kit and the flat short stroke trigger kit have transformed this little gun.



Just do it. This is the way it should have been from the factory.

Good upgrade

Rating:
review-star review-star review-star review-star review-star

Review

Somewhat of a pain to install following the video instructions. I did not order the flat trigger upgrade but did follow the instructions for installing the trigger spring. Only the trigger spring supplied did not match the web site photo and I assume was only for the flat trigger upgrade. I did send in a support request along with a photo of the stick spring and the differently shaped spring supplied with the kit (no response at this time). So reinstalled the original trigger and spring.

Result is an easier pull, just not sure what to do about the incorrect trigger spring.
review image  

Great kit!

Rating:
review-star review-star review-star review-star review-star

Review

Quality spring set, did wonders for an LCP max. Reasonable shipping times and easy to install. Made a world of difference in the trigger. For the money, I would recommend all day long!

Great product

Rating:
review-star review-star review-star review-star review-star

Review

Installed these springs and have a 100% improvement in trigger pull. I can now pull the trigger without breathing hard. Just kidding but my Max did have an extremely tough trigger pull. No more.

Greatly improves the trigger pull

Rating:
review-star review-star review-star review-star review-star

Review

I used the 10lb spring combined with the MCARBO trigger upgrade. This made a huge difference. When dry firing the gun no longer makes the "cheap" spring noise that the OEM spring made. I haven't officially tested the trigger pull reduction, but the difference is noticeable!

It really does work

Rating:
review-star review-star review-star review-star review-star

Review

Easy to install went from over 7lb to just over 3lb I also installed short stroke trigger at the same time I used 10lb spring

It really does work

Rating:
review-star review-star review-star review-star review-star

Review

Easy to install went from over 7lb to just over 3lb I also installed short stroke trigger at the same time I used 10lb spring

LCP MAX

Rating:
review-star review-star review-star review-star review-star

Review

This trigger kit was a wonderful upgrade to my pistol. It made a huge difference in the trigger pull and feel of my gun. It installed very easily and performed flawlessly. The install videos were helpful. This is a quality product from a quality company.