Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
Everything came very fast, well packaged and MCarbo’s communication is great. My I only concern is with the guide rod, which came unfinished. The very center of the large flat end of the guide rod had a sharp spike poking out that wasn’t cut properly. The opposite end (smaller end) was flat with no spike, but its edges were sharp to the touch. Stainless steel is harder to cut than regular steel and creates these extremely sharp edges that need to be finished off. I was able to file them down and install it, but the part was not ready out of the package. The guide rod is also different in design from the original. The main difference announced is the stronger spring and stainless steel material construction, but it is also 1/16 inches shorter and the small end is flat and not round like the original. See pictures for reference.
Ordered this to improve the trigger pull on my CPX1 and it did! Went from almost an 8# to a 4.5# pull! Watched the video, which helped tremendously, and tore into the upgrade as I watched. The guns in the video obviously had been dis/reassembled several times before and it was stated as so. I had some difficulty removing the pins to remove the trigger assembly but finally got it done. My gun is an older version, and the trigger bar did not have the slot for the hook on the trigger bar spring to fit into, so I had to modify the spring a little.
I wasn’t certain whether or not this was a value add to my pistol, but after about 50 rounds since the upgrade, it’s fantastic. Installation videos are great. The pistol (CPX-2) has a much more manageable recoil, better muzzle control, and hold on sight picture at the trigger break point. No jams or failures so far, and I believe this will make the Sccy a solid shooter. Great design, instructions, and performance. I don’t think you can go wrong. One small detail after installation, the recoil spring when placed in position to the barrel, it catches the frame of the pistol making it a slight hang up to reassemble. Light pressure with your thumb when marrying the slide to the frame works for getting it in position All in all, I love what this has done for my pistol.
Easy to install but I had to take off material from the hook end of the trigger return spring. It was too long and the fire control would Not go back in the frame properly. The spring was poorly trimmed and jagged. Good function for a hammer fired trigger.
I got it together and it would not fire. Called and emailed to no avail. The will be happy to take your money but will not assist past mailing it.