Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
I'll need to share this with a good gunsmith. The initial step resulted in me bending two punch pins. Not sure why that is, but not an easy trade out of springs like job I had with my 870 and ABolt.
I was initially concerned that the trigger work might make my pocket pistol unstable for said carry position. After install, no worries, the kit reduced trigger pull from 6.7 to 3.7ish lbs based on Measurements. So here’s some other install procedures that will help as follows: 1. The firing pin retaining roll pin is the more challenging. The advised 3/32 is a bit to big when initially starting the pin removal since it starts off in an angle, 1/16 is better starter then finish with 3/32. 2. Reinstalling the retaining firing pin is a bitch. Getting the pin started is not as simple as the video illustration. Also, be careful not to over press the firing pin when reinstalling the roll pin because you can accidentally push the pin to far and tap the roll pin behind the firing pin. Simply put, coordinating punch and reinstalling pin is doable but be prepared to spend some time refitting. 2. When reattaching the hammer spring to the base pin, make sure your needle nose pliers aren’t bent at the tip, the spring will slip off the pliers repeatedly making the final step frustrating. All in all, after installing all spring upgrades, I love the final results! Get one before you can’t.
One of the best for the price upgrades, along with the houge handal grip cover 50 dollars totally changes the pistol
Smooth clean trigger pull in my LCP with this kit installed. No failures of any kind so far. Really notice the effect of better trigger control when I’m engaging targets beyond arm’s length distances. The installation video is REALLY GOOD. Watch the video a couple of times so you know what’s coming next, then re-run it once more while you are doing the install.
My only lcp complaint has always been the trigger. This upgrade did everything I hoped except reduce the travel of the trigger which I knew this kit was not going to do. It did, however, reduce the force required by more than half making this little gun much easier to shoot. I have not put any rounds through it just yet, but there is a huge difference in dry fire testing. The installation video was very well made and absolutely required for install. As always, excellent product and excellent company. Will definitely continue to do business here.
Major improvement & low cost. A must have for the heavy triggered lcp.
Perfect installation. Great follow up!
Everything was perfect. Spring kit made a huge difference. Now a new trigger and I'm right where I want to be. Just a thought, remember the firing pin roll pin is at an angle to the slide and make sure you use a hardened punch to drive it out. MCarbo came through to make my LCP so much easier to shoot this pistol.
This kit was an awesome upgrade over the factory trigger pull. The installation video was nicely done and made the installation a snap. I highly recommend this product.
It was easy to install and really improved the trigger pull weight.
I installed this kit on my ruger LCP. If you can only make one improvement, this is the one to make. Huge improvement in the trigger. Highly recommend this kit. Do yourself a favor and install the kit. The video makes it super easy to do.
I was impressed with the quick delivery time. But I was even more impressed with your video which made the installation easy. Great job M*CARBO. The great news is your kit has made this LC9 a great shooting pistol. Thank you, Jim
Great spring kit. Now my wife finds shooting her LCP much easier with the easy trigger pull.
M* carbo always exceed my expectations. I received the parts faster than I thought possible, and I have already installed them. The installation went smoothly, and the improvements are fantastic. It’s so much fun working with m*carbo and following their videos to install their products that I think I’ll order more just for the fun of it. Bill
Excellent product works better than stock part.