Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
Just installed with video help clear and concise instructions. My 1095 acts completely different no hard creep and then instant let go. Clean pull you can feel the break about to happen. The pull is definitely lighter then the pull of a brick with the stock trigger! Much impressed and second time happy customer for a reason!!!
I bought two of these springs for both my .45 and 9mm HiPoint carbines. After consulting the Oracle (Google) on installation and upgrade tips I learn that installing this spring may cause the HPC to experience failure to feed or possibly go full auto without warning. MCarbo does CYA and has a disclaimer on the spring and many people haven't had any real issues with the spring, but there were apparently enough to cause concern. I have no issues with the FTF because c'mon.... it's a HiPoint, but the unexpected runaway is a severe liability issue on the shooter's part. I KNOW I'm going to have reliability issues with a cheap gun, but I don't think I need to make it dangerously unreliable. Until a manufacturer approved upgrade can be had to improve the trigger, I'll put up with the 8lb milspec trigger pull.
Simple to install, especially with the detailed instructions and video help if you need it. Highly recommend this simple upgrade to your trigger. You might think your rifle feels fine and it’s not worth the hassle of install, but do it. Really improves the feel in every aspect. Just go for it
Better than it was after MCarbo does its magic
It made the rifle alot more enjoyable to shoot. I'd recommend this upgrade for sure.
Easy change out not much to it just watched the video and had the spring changed out within ten min. Def made a difference
Changing the spring is the easy part. Disassembling the carbine to get to it is a genuine pain in the butt. Thank goodness for the step by step installation video. Works as advertised, greatly improves the trigger pull.
Easy install on my 4585 carbine, very noticeable difference than stock trigger. Will definitely be ordering another for my 995.
Thank you brothers, US Army 67-70. Some people questioned my choice of a Hi Point 9mm carbine. Then yesterday i took it to the range with the new trigger spring installed. Well i made a believer in MCARBO and the Hi Point 995TS. The take up in the trigger is gone. The trigger pull is now smooth and easy. And the video makes it easy for anyone to make the change. And i can't forget the short delivery time. THANKS AGAIN!!
Great upgrade to my Hi-Point. I did the recoil spring and guide rod at the same time, super easy with their video. Fast shipping and great customer service.
This is a big improvement in tension and feel. One of the best things that can be added to a Hi-Point carbine to improve an otherwise good rifle. It might be a mental thing but seems to improve break point feel.
I done a lot of research try to find a trigger upgrade for my 40 S&W carbine. And couldn't find any true improvements for the Hi-Point until now. It was an easy installation with their video. Couldn't believe the difference a little spring would make. Also great price. Thanks guys.
I received the 2 trigger springs I ordered very quickly. With a manual for my 995 and instructions supplied by this vendor I was able to clean and service my firearm and reduce the trigger drag at the same time. My trigger pull we from 8.2 lbs which was very bad, down to 5.2 lbs. I am very happy with this trigger spring. And the install was very easy., Thank you!
Prior to installing the M*Carbo trigger spring my trigger pull was off the charts (probably greater than 10 lbs) and very mushy. After installing the trigger has a crisp let off but is still hard to pull but not as hard as it was. I haven't shot the rifle yet and I'm hoping that shooting will free the trigger up. Regardless, it's a better situation than I had initially.
I have 5 Hi-Point carbines, 1 I have owned for 15 years. I recently bought 10mm and it has a miserable trigger. This was the 1st to get the spring. Very little improvement. Removed and installed into another unit. Found out the 10 needed to be broke in to improve. Now I am satisfied with all my carbines, triggers improved 2 to 4 lb each. Now they range from 5.5 lbs to 7.5 lbs and improve with use. If you have a new carbine, be patient. My 10 took a lot of rounds to loosen up plus cleaning the factory paint off critical parts. Thanks Chris for the great improvement!
Well worth the purchase very noticeable difference in trigger pull.