Need assistance? Call the experts: (727) 223-1816

  • KEL-TEC SUB-2000 Safety Pin and Spring Replacement
  • KEL-TEC SUB-2000 Safety Pin Next to Safety Spring
product-image

KEL-TEC SUB-2000 Gen 2 Safety Pin and Spring Replacement

review-star review-star review-star review-star review-star
(3.67) 3 reviews
Price: $5.95
in-stock-product Availability: IN STOCK

Retail: Retail: $8.95

You Save: $3.00 (33.5%)

IN STOCK Quantity: 58

Quantity:
pledge
Product Information

About This Item

WHAT'S INCLUDED:

  • 1 - Larger Brass Safety Pin for Gen 2
  • 1 - Safety Pin Spring
Description

KEL-TEC SUB-2000 Gen 2 Safety Pin and Spring Replacement

    Part number 264 & 269 on Exploded View

    Reviews
    KEL-TEC SUB-2000 Gen 2 Safety Pin and Spring Replacement
    review-star review-star review-star review-star review-star
    I installed this on my sub-2000 40 cal after losing the stock one my bad lol it was easy to install.
    would I buy it again yes only if I lose another one (:
    I just picked up the sub-2000 9mm
    review-star review-star review-star review-star review-star
    The safety pin and spring fit and perform flawlessly. I received the parts about 5 days after ordering.
    Pin
    review-star review-star review-star review-star review-star
    Pin does not fit. Too big
    Questions & Answers
    0 0
    Question:
    G'day All, I have a Gen 2 and at my last match the Safety Pin and Spring popped out of the safety(part 266). I ordered your Gen 2 Safety Pin and Spring Replacement. Cannot figure out how to get it to stay in. With the safety in the ON position, it's easy to drop the spring and pin into the tiny hole on the safety. I push the safety to OFF (the hole goes into the frame and I assume the spring and pin are now locked in), wrong. When I put the safety back ON(it's very sticky), it slides all the way back out and the spring and pin come out. The gun is assembled during my attempts, do I need to totally take it apart for this process? Looking at owners manual, not seeing another piece that I may be missing. Of course I could be wrong on that. Finding nothing on the internet or your website on this procedure. Thanks....terry
    May 19, 2022 7:13 PM
    Answers
    after posting yesterday I studied the manual again and noticed there are two C clips on the safety. Checked my Sub and the one on the fire side was missing. Ordered C clips and some more Sub 2000 stuff from you guys and hopefully everything will be good by early next week. regards...terry
    Answered by
    / May 20, 2022 9:03 AM
    Your safety is supposed to have 2 C clips that keep the safety from moving to far in either direction. If your safety moves far enough for the detent and spring to come out, then I would gather you are missing a C clip or two. If the C clips are there, you can send pictures to our Help@mcarbo.com email and we can take a look to better assist you.
    Answered by
    Kenneth Noble / May 20, 2022 8:09 AM

    About This Item

    WHAT'S INCLUDED:

    • 1 - Larger Brass Safety Pin for Gen 2
    • 1 - Safety Pin Spring

    KEL-TEC SUB-2000 Gen 2 Safety Pin and Spring Replacement

      Part number 264 & 269 on Exploded View

      Product Reviews (3)
      review-star review-star review-star review-star review-star
      3.67
      KEL-TEC SUB-2000 Gen 2 Safety Pin and Spring Replacement
      review-star review-star review-star review-star review-star
      I installed this on my sub-2000 40 cal after losing the stock one my bad lol it was easy to install.
      would I buy it again yes only if I lose another one (:
      I just picked up the sub-2000 9mm
      review-star review-star review-star review-star review-star
      The safety pin and spring fit and perform flawlessly. I received the parts about 5 days after ordering.
      Pin
      review-star review-star review-star review-star review-star
      Pin does not fit. Too big

      Questions & Answers

      1 Questions

      0 0
      Question:
      G'day All, I have a Gen 2 and at my last match the Safety Pin and Spring popped out of the safety(part 266). I ordered your Gen 2 Safety Pin and Spring Replacement. Cannot figure out how to get it to stay in. With the safety in the ON position, it's easy to drop the spring and pin into the tiny hole on the safety. I push the safety to OFF (the hole goes into the frame and I assume the spring and pin are now locked in), wrong. When I put the safety back ON(it's very sticky), it slides all the way back out and the spring and pin come out. The gun is assembled during my attempts, do I need to totally take it apart for this process? Looking at owners manual, not seeing another piece that I may be missing. Of course I could be wrong on that. Finding nothing on the internet or your website on this procedure. Thanks....terry
      May 19, 2022 7:13 PM
      Answers
      0 0
      after posting yesterday I studied the manual again and noticed there are two C clips on the safety. Checked my Sub and the one on the fire side was missing. Ordered C clips and some more Sub 2000 stuff from you guys and hopefully everything will be good by early next week. regards...terry
      Answered by
      / May 20, 2022 9:03 AM
      0 0
      Your safety is supposed to have 2 C clips that keep the safety from moving to far in either direction. If your safety moves far enough for the detent and spring to come out, then I would gather you are missing a C clip or two. If the C clips are there, you can send pictures to our Help@mcarbo.com email and we can take a look to better assist you.
      Answered by
      Kenneth Noble / May 20, 2022 8:09 AM