• Ultimate KEL-TEC PLR-16 Trigger Replacement!
  • KEL TEC PLR-16 & SU-16 / PLR-22 & SU-22 Aluminum Trigger
  • Tumbled Smooth and Hard Platted with Black Anodizing
  • Direct replacement parts for the factory plastic trigger that flexes
  • Crisp & Clean Trigger Pull Improvement
  • Functions in all SU-16 models, SU-22, PLR-16 & PLR-22
  • Protected by the M*CARBO 100% Lifetime Guarantee
  • Made in the USA!
  • Fast Same Day Shipping!

KEL TEC PLR-16 & SU-16 / PLR-22 & SU-22 Aluminum Trigger

  • CNC Machined 6061 Aluminum Trigger

Put a real trigger on your KEL-TEC PLR-16 & SU-16 that won't flex or warp under rapid fire! The M*CARBO Aluminum Trigger was designed to put you in more control of your KEL-TEC PLR-16 & SU-16. Your new KEL-TEC PLR-16 Trigger will allow you to perform at greater levels than previously possible with that flimsy plastic trigger. 

The KEL-TEC SU-16 Trigger by M*CARBO is CNC milled out of a block of 6061 aircraft grade aluminum, then tumbled to remove sharp corners and finally hard platted with black anodizing to give it superior strength and a premium finish. This is the Ultimate Machined Aluminum Trigger for your KEL-TEC SU-16 or KEL-TEC PLR-16 that will out last and out perform the factory plastic trigger. These KEL-TEC PLR-16 parts are perfect fit. You will immediately notice a much smoother and crisper SU-16 trigger pull with this machined aluminum target trigger. No more flexing or jerky trigger pull. 

This is one of the best trigger improvements you can make to your KEL-TEC SU-16 or KEL-TEC PLR-16 aside from the KEL-TEC PLR-16 & SU-16 Trigger Spring Kit which will reduce your trigger pull from 6.75 lbs to a modified 5.5 lbs. Get both KEL-TEC SU-16 Parts to install at the same time to get the most desirable trigger pull available on the market!

KEL TEC SU-16 & SU-22 Owners Manual & Exploded View:

If your getting the KEL-TEC PLR-16 & SU-16 Target Trigger, then you might find the following KEL TEC SU-16 & SU-22 Resources useful in further enhancing your firearm. Download the KEL TEC SU-16 or SU-22 Owners Manual. Use the SU-16 or SU-22 Exploded View to get a better look at the parts your replacing. Print or Download the KEL TEC SU-16 & SU-22 Target Trigger Installation Instructions.

100% Lifetime Guarantee:

The KEL-TEC PLR-16 & SU-16 Target Trigger is protected by the M*CARBO No Hassle 100% Lifetime Guarantee against any product quality issues or workmanship defects. If parts fail or are deemed defective we will send you a replacement regardless.


Tested and Approved:

The KEL-TEC PLR-16 & SU-16 Target Trigger has been repeatedly tested with numerous brands of ammunition to ensure reliable operation and safety.


Veteran Owned and Operated Business:

American made gun parts designed and manufactured by Combat Veterans. We will donate a portion of your purchase to the Military Foundations we humbly support.


ATTENTION:

You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Installation by MCARBO is available and recommended. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without this KEL-TEC PLR-16 & SU-16 Target Trigger. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

Q: What models will this trigger fit?

A: KEL TEC SU-16A, SU-16B, SU-16C, SU-16CA, SU-16D, SU-16E & SU-22 / PLR-16 & PLR-22

Q: Will this fit in the SU16E with the AR-15 Style Stock?

A: Yes it will fit in the SU16E with the AR-style stock.

No Hassle M*CARBO 100% Lifetime Guarantee - This means that at any time you can send it back and we will exchange it, issue a refund or assist you in any way possible. No Hassles Ever!

We pride ourselves in making quality parts for guys like us that appreciate great performance out of a well made firearm. So if you don't get the results you we're expecting or just don't like it. We will make it right by any means necessary. Send us an email to help@mcarbo.com We also pride ourselves in outstanding customer service so send us an email and we will show you.

Once you're part of the M*CARBO Brotherhood your not just a customer...you're a Brother! M*CARBO Brotherhood - Veterans, Police Officers and 2nd Amendment Patriots! A portion of all sales go to the Military Foundations we humbly support.

ATTENTION: We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon my be prohibited in your state. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that my be incurred.

Overall Customer Rating of 23 Reviews:
California

Get The Bundle!

Rating:
Pros:
Cons:
Do yourself a favor and go ahead and buy the “Complete Trigger Job Bundle”. It comes with a trigger return spring and a screw replacement kit. I installed it and immediately noticed the difference. Not only does the aluminum trigger have a better feel, it has a crisp break with almost no “take-up” or “slack” after the reset. The trigger moves freely with no “creep” making the pull feel even better than some of my competition triggers with a lighter pull. An added perk is changing out the trigger return spring softened up the safety, ensuring positive engagement and re-engagement of safety on the first try every time. This upgrade is a must and should be the first upgrade done to a SU-16 or other Kel-Tec rifle. It’s like buying another rifle for less than $40.

State of Jefferson

Makes The PLR-16 Combat Ready

Rating:
Pros:
Cons:
The most noticeable weak point on the PLR-16 is the plastic trigger, putting into question one of the best performing 5.56mm pistols available. The MCARBO aluminum trigger insures the Murphy's Law "If it can break, it will break" does no longer apply to the PLR-16. Installation was relatively simple and fitment of the sear into the triggers as well as the trigger assembly into the lower receiver was perfect. I'm going to skip buying a Sig Sauer MCX Vitrus 5.56 pistol because of the PLR-16's improvement using the MCARBO aluminum trigger.

If the Keltec factory used the MCARBO trigger they would probably sell more PLR-16's, and including a handguard with 3 picitinny rails instead of just 1 wouldn't hurt sales either.

Ohio

Easy install

Rating:
Pros:
Cons:
Easy install video was step by step easy to follow

Great trigger

Rating:
Pros:
Cons:
I had purchased a trigger from M* CARVO. IT WAS MORE THEN IMPRESSED. I was expecting a Regular polymer trigger but M* CARBO went above and beyond, making the trigger into a high grade metal. Really it was more then empresses to be honest. Now I know my new trigger won’t break on me ever. M* CARBO IS S GREAT COMPANY. More business for me for now on. Grea Gtreat company M* CARBO.

Ontario

high quality upgrade

Rating:
Pros:
Cons:
The installation was a bit difficult but not due to Mcarbo's fault. The product itself is very high quality and solid. Highly recommended.

Number of questions: 0