KEL-TEC SUB-2000 Double Finger Extended Charging Handle - What's Included:
Available in 2 different variations:
- Matte Black - No Grip
- Double Finger Grip Covers - 1/8" Grip Sleeve
Give yourself much more positive control over the operation of the bolt with the ultimate extended charging handle upgrade! Increased control and speed when operating the charging handle on your SUB-2000.
The KEL TEC SUB-2000 Double Finger Extended Charging Handle will make charging the bolt feel effortless due to the increased leverage, and will effectively eliminate the stiffness currently experienced in the stock configuration. Make your loading and clearing operations so much faster with the stiffness reduction and increased leverage of the extended length and superior custom grip options.
Includes Stainless Steel Locking Pin for Added Strength and Lockup inside Bolt!
2 Grip Cover Options:
- The standard option is in a black matte finish without any grip. The texture is very smooth!
- The Double Finger Charging Handle Cover consists of 2 precision cut rubber sleeves that add an extra 1/8" of padding all the way around the handle. Lifetime durability!
KEL-TEC SUB-2000 Resources:
If you're getting the KEL-TEC SUB-2000 Double Finger Extended Charging Handle, then you might find the following
KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the
Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project.
Tested and Approved:
The KEL-TEC SUB-2000 Double Finger Extended Charging Handle has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC SUB-2000 Double Finger Extended Charging Handle. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Updated Review
I put up a 1 star review previously because I was having a hard time installing after viewing the instructional video. There are however folks in the comments section of the video that provided easier install instructions, such as simply twisting the allen wrench to compress the spring rather than trying to brute force it. It is better than the OEM charger.
Not for noobs
I admit I am new to firearms, but this should not be this hard to install. It is just a charging handle. I may update my review once I get it installed but who knows when that will happen.
Good Product, POOR Seller
I bought a Keltec Sub2000 (9mm) in March of 2023, and wanted to upgrade it.
Placed an order with Mcarbo 3/23/23 for some parts. Wanted to order a QD Single Point Sling Mount, but had issues due to their website. I ordered several items, but not the QD sling mount.
IMMEDIATELY after placing my order online, I submitted a support request, asking if I could add the item to my order (at additional cost, of course).
NEVER received a reply.
Hmmm...
Four days later (3/27), I emailed help@mcarbo.com re: my request.
NEVER received a reply.
Hmmm...
On 3/29, I posted on Facebook, tagging Mcarbo re: lack of support.
NEVER received a reply.
Hmmm...
On 3/30, I sent a letter via US Mail to the President/CEO of Mcarbo.
As of 4/13/23, NEVER received a reply.
I'm forced to decide that Mcarbo DOES NOT CARE about its customers, despite its YouTube videos.
Sad....
makes cocking the gun much more comfortable
this thing is a huge pain to install, having to compress a big strong floppy spring with one hand while slipping a tiny, fiddly little part into place with the other, but once it's in, it's a fantastic improvement.
however, be aware that you have to get all the little parts precisely aligned inside or you won't be able to lock the bolt back anymore. should have stuck with the original kel-tec design of the shaft that goes into the bolt, since it doesn't matter if it rotates or not.
Not so great
The charging handle is not that easy to put in due to complicated locking pin, WTH is the Allen wrench for???). You will need to reinstall every time you take your gun apart to clean. It does feel good charging back but this charging handle will not all you to lock you bolt all the way back to the notch, so you can’t lock it back one the new charging handle is on which is big downer and can be a pain if you need to tinker with it in the field if that’s what you’re using it for. Expensive for something that does not provide same functionality as the stock charger
Worth the money
I am older with arthritis issue's. This makes going to the range much more enjoyable. I recommend it for all Ketec owners.
Two finger SU2000 charging handle
Well made as all other M-Carbo products I have purchased over the years. Installation is a pain but the tutorial video is very well made and helps a lot. I made it. Charging my rifle is definitely easier.
I had asked also for the rubber sleeves for this charging handle but I did not receive them! M-Carbo slipped on this one.
I recommend all M-carbo products from personal experience.
Claude
So much easier to charge
Im definately glad I upgraded to this double length charging handle and the rubber sleeve. Very first thing I noticed when i started working wifh the gun was how difficult it felt to charge the bolt back. This makes it so mich easier and when it is locked back all you gotta do is give it a nudge and itll go forward and yiure ready to go. I couldnt do any of that with the factory nub.
Is there a Double Finger & Recoil-less(yes, a heavy/thick double finger charging handle) Charging Handle for sale? I love my heavy Recoil-less charging handle, but I would also like it Double Finger sized. I would buy 2 instantly!
Is this selection for the double finger charging handle or something else and what is “Black Nitride Plated no grip”? The way thats listed leaves me to believe its somehow a different charging handle and not something to do with the double finder charging handle. Kind of either or situation without understanding what black nitride is or what it does?
Bodhi May 5, 2023 3:22 AM
Will this work properly without the integrated tool-less locking pin, or is it required to install?
Yes, you need to install the tool-less locking pin if you don't you can run into the issue where your charging handle will fall out.
Will this work on the SUB CQB?
Does these work on the first generation .40 caliber also?
Functions in both the Gen 1 & Gen 2 models of the SUB-2000