Products 1-5 of 5
Show
Sig Sauer P238 / P938 Trigger Spring Kit
(102)
Retail: $20.95
Price: $15.95
Availability: In Stock
MCARBO Item #: 277777888979 -

    Sig Sauer P238 / P938 Gen 2 Trigger Kit Custom Lighter Sear SpringStainless Steel Sear Spring RetainerCustom Lighter 12 lb Hammer SpringCustom Lighter Firing Pin Spring The Sig Sauer P238 & P938 Trigger Spring Kit will give you a reliable trigger pull reduction with a custom reduced power firing pin spring and reduced power hammer spring.  Reduce your Sig Sauer P238 gen 2 Trigger Pull by 50% from 7lbs to 3.5lbs! What's the difference between the Gen 1 and Gen 2 Sig P238 / P938?...

    1,000 Grit Ultra Fine Silicon Carbide Sandpaper - 10 Pack
    (6)
    Retail: $2.99
    Price: $1.99
    Availability: In Stock
    Item #: 22229222522222 -

      Silicon carbide is an abrasive sharp synthetic mineral that cuts fast and smooth.  Use with water or cutting oil to reduce clogging and extend abrasive life.  Due to its razor-sharp grains, silicon carbide will have no problem easily cutting glass, plastic, and metal under light pressure.

      9MM / .380 / .38cal / .357 Bore-Snake - Gun Barrel Cleaner
      (11)
      Retail: $9.95
      Price: $8.95
      Availability: In Stock
      Bore-Snake Item #: 22229222411111 -

        9MM / .380 / .38cal / .357 Bore-Snake Gun Barrel Cleaner Works Great with MIL-SPEC CLP! Get the inside of your barrel clean with the Bore Snake Cleaner.  It’s a flexible bore cleaning device that is designed to clean the bore of pistol and rifle barrels.  Solvent safe and will not deteriorate when you apply bore cleaner to it.  One piece design removes fouling with the integrated corrosive-resistant bronze brushes and wipes it away in one pull thorough the...

        Firearm & Feed Ramp Polishing Kit
        (85)
        Retail: $15.95
        Price: $12.95
        Availability: In Stock
        MCARBO Item #: 19970200201 -

          Firearm & Feed Ramp Polishing Kit includes: 1/2 oz can of Non-Abrasive Firearm Polish3 Bullet Felt Tipped Dremel Polishing Bits1 Pair of Black Nitrile Industrial Strength Gloves1 Microfiber Towel Polishing your Feed Ramp greatly Improves feeding operations by eliminating microscopic machining lines that slow down the travel of the bullet into the chamber, thus increasing the chances of an Failure to Feed (FTF) Malfunction. Watch the video below for a "How to Polish Feed Ramp" instructions....

          Gunsmith Bench Block
          (77)
          Price: $6.95
          Availability: In Stock
          MCARBO Item #: 200033667778 -

            Gunsmith Bench BlockGunsmith Bench Block 1" Thick 3D Printed ABS Plastic - Moderately Rugged 4 holes - 3/16" - 1/4" - 5/8" - 3/4" One 1/4" slot for pushing out pins under tension Simple and Effective Design to Replace the Block of Wook with a Hole in it.

            Do you have any ideas for New Sig Sauer P238 Accessories or Sig Sauer P938 Accessories?  We want to hear them!  Send ideas to chris@mcarbo.com