KEL TEC PLR 16 Accessories | KEL TEC PLR-16 Parts | KEL TEC SU 16 Accessories

Talk to an Expert (888)347-1276


KEL-TEC PLR-16 / SU-16 Complete Trigger Job Bundle

Consists of 29 different parts:

  1. Trigger Return Spring
  2. Machined 6061 Aluminum Trigger
  3. Set of 26 - Black Oxide Coated Grade 8 Standard Industrial Screws
  4. Synthetic Grease with PTFE

All In One Complete KEL-TEC PLR-16 / SU-16 Trigger Job Bundle! We recommend installing all of these upgrades at the same time to get the lightest trigger pull and most performance out of your PLR-16 or SU-16. The really nice thing about this bundle is that all of the parts can easily be installed at the same time rather than opening up your PLR-16 / SU-16 each time you want to gradually upgrade it. Not to mention it's going to shoot like a completely different firearm when your finished! You just might get completely addicted to your PLR-16 / SU-16 after you feel the results!

The KEL-TEC PLR-16 / SU-16 Complete Trigger Job Bundle will reduce your trigger pull weight from a factory 6.75 lbs. to a crisp 5.5 lbs. The Machined 6061 Aluminum Trigger will eliminate Trigger Flex! It's also Tumbled Smooth & Hard Platted with Black Anodizing for Superior Strength and Durability. We also included the Ultimate Machined 6061 Aluminum Trigger Guard. Tighter tolerances than factory trigger guard to prevent wobble and more sturdy lever when folding barrel assembly. Aircraft grade aluminum, then tumbled and chamfered to remove sharp corners and finally hard platted with black anodizing to give it superior strength and a premium lifetime finish.

This Kit will work for all SU-16 models, SU-22, PLR-16 and PLR-22.

KEL TEC SU-16 & SU-22 Owners Manual & Exploded View:

If your getting the KEL-TEC PLR-16 / SU-16 Trigger Job Bundle, then you might find the following KEL-TEC PLR-16 / SU-16 Resources useful in further enhancing your firearm. Download the KEL-TEC PLR-16 / SU-16 Owners Manual or use the Exploded View of the KEL-TEC PLR-16 / SU-16 Parts Diagram to plan your next firearm project. Print or Download the KEL-TEC PLR-16 / SU-16 Trigger Spring Kit Instructions by MCARBO.

No Hassle 100% Lifetime Guarantee on Parts & Accessories:

The KEL-TEC PLR-16 / SU-16 Complete Trigger Job Bundle is protected by the MCARBO 100% Lifetime Guarantee. This means that at any time you can send it back and we will exchange it, issue a refund or assist you in any way possible.


Drop Tested and Approved:

M*CARBO ASTM Spec Springs will offer a perfect trigger pull reduction with an unlimited drop test rating (3", 6", 9" & 12"+).


Range Tested and Approved:

The KEL-TEC PLR-16 / SU-16 Complete Trigger Job Bundle has been tested repeatedly with numerous brands of ammunition to ensure reliable operation and safety.


Veteran Owned and Operated Business:

American made KEL-TEC PLR-16 / SU-16 Complete Trigger Job Bundle designed and manufactured by Combat Veterans. We will donate a portion of your purchase to the Military Foundations we humbly support.


ATTENTION:

You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC PLR-16 / SU-16 Complete Trigger Job Bundle. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

No Hassle M*CARBO 100% Lifetime Guarantee - This means that at any time you can send it back and we will exchange it, issue a refund or assist you in any way possible. No Hassles Ever!

We pride ourselves in making quality parts for guys like us that appreciate great performance out of a well made firearm. So if you don't get the results you we're expecting or just don't like it. We will make it right by any means necessary. Send us an email to help@mcarbo.com We also pride ourselves in outstanding customer service so send us an email and we will show you.

Once you're part of the M*CARBO Brotherhood your not just a customer...you're a Brother! M*CARBO Brotherhood - Veterans, Police Officers and 2nd Amendment Patriots! A portion of all sales go to the Military Foundations we humbly support.

ATTENTION: We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon my be prohibited in your state. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that my be incurred.

Overall Customer Rating of 19 Reviews:

Rating:
Pros:
Cons:
keltec plr 16 trigger kit. cut the trigger pull in half, using a bow scale, from around 8 lbs, to around 4 lbs. also is a lot more krisp, did hone the sear a bit also. thanks

Su16 trigger bundle

Rating:
Pros:
Cons:
Received parts quickly, as usual, from MCARBO. The installation video is helpful, but for those with the Charlie model, you need to understand the folding stock which must be removed to separate the halves of the trigger assembly. Have EXTRA tie wraps on hand.

Once the stock is removed, tie wrap the latch assembly, as well as the other parts indicated in the video. Dissasembly into two halves is straightforward, as is reinstalling and tie wrapping the trigger group and hammer group. Re-assembling the two halves is problematic. The trigger tie wrap twists the assembly slightly, making matching holes and pins difficult. Make sure the trigger pin is FULLY seated. The coil on the hammer spring also blocks pins and holes, all while working the hammer up and down. Finally, after numerous attempts and tie wraps, I got it reassembled. This was more difficult than the trigger job on the Sub2k. Function is perfect. Trigger pull (Lyman digital) went from 5/10 to 4/6. I am very pleased with the result.

Kansas

If you own a PLR-22, you need one.

Rating:
Pros:
Cons:
One of many upgrades from Mcarbo that I have done on a PLR-22.

Also purchased several upgrades for Gen2 Sub2000. Everything has fit like a glove and the performance upgrades were well worth it. Not that hard to install any of these products, especially with the installation videos available. One place where you can get the best product out there for Keltec firearms.

RI

Complete trigger package

Rating:
Pros:
Cons:
The parts came in quite quickly, and following the instructional video by MCarbo, it was not very difficult to install. I didnt notice too much more lightness in the trigger, even though I bought the lighter spring, BUT, I had only fired the gun one session before i changed out the trigger and spring. What iI surely did notice was the difference between the stock plastic trigger and the new aluminum one. New one is solid! Better feel, better look, it belongs. As the other reviews suggest, get this set up! The new screws it comes with are great quality too, gives the rifle a much better, professional look. MCarbo will be my first choice for any parts im looking for.

Wisconsin

Worth the money

Rating:
Pros:
Cons:
Fast shipping, easy installation. With the video I was able to get it in fast. Video is put together well. Have not shot it yet, but high hopes. Decided to hit it with a khaki paint job since I had it all apart, looks great, trigger feels much better (decided I had to dry fire it at least once) I hope mcarbo finds more things to improve for these rifles. ( like a high quality extractor! )