KEL-TEC SUB-2000 Trigger | KEL-TEC SUB-2000 Aluminum Trigger | KEL-TEC SUB-2000 Trigger Upgrade

Talk to an Expert (888)347-1276

  • The Ultimate KEL-TEC SUB-2000 Trigger Replacement
  • Machined 6061 Aluminum Trigger will eliminate Trigger Flex!
  • Tumbled Smooth & Hard Platted with Black Anodizing for Superior Strength
  • Corrects Factory SUB 2000 Trigger Problems
  • Trigger Upgrade provides clean & crisp trigger pull improvement
  • Functions in both the Gen 1 & Gen 2 models of the SUB-2000
  • Protected by the MCARBO 100% Lifetime Guarantee
  • Made in the USA
  • Fast Same Day Shipping!

Ultimate KEL-TEC SUB-2000 Trigger:

  • Custom Designed & Manufactured by M*CARBO

Put a real trigger on your KEL-TEC SUB-2000 that won't flex or warp under rapid fire! The MCARBO Target Trigger was designed to put you in more control of your SUB-2000.

The KEL TEC SUB 2000 Trigger Problems have a real impact on shooter performance. The major advantage to the KEL TEC SUB-2000 Trigger Replacement is that it won’t flex like the plastic trigger. Another advantage is the wider smooth blade on the trigger with no hump in the middle or plastic ribs like the factory plastic trigger it the most ideal KEL TEC SUB 2000 Trigger Upgrade available. Most KEL-TEC SUB-2000 Trigger Problems can be resolved with a new KEL-TEC SUB-2000 Trigger. Your new MCARBO Target Trigger will allow you to perform at greater levels than previously possible with that flimsy plastic trigger.

The KEL-TEC SUB-2000 Target Trigger by MCARBO is CNC milled out of a block of 6061 aircraft grade aluminum, then tumbled to remove sharp corners and finally hard platted with black anodizing to give it superior strength and a premium finish. This is the Ultimate Machined Aluminum Target Trigger for your SUB-2000 that will out last and out perform the factory plastic trigger. You will immediately notice a much smoother and crisper trigger pull with this machined aluminum target trigger. No more flexing or jerky trigger pull.

This is one of the best trigger improvements you can make to your KEL-TEC SUB-2000 aside from the KEL-TEC SUB-2000 Trigger Spring Kit which will reduce your trigger pull from 7.5 lbs to a modified 5.25 lbs and is one of the few KEL-TEC SUB-2000 Accessories used by the KEL TEC Shooting Team! Get both to install at the same time to get the most desirable trigger pull available on the market for your KEL-TEC SUB-2000. The KEL-TEC SUB-2000 Aluminum Trigger Upgrade will fit both the Gen 1 and Gen 2 models. MCARBO had the shooter in mind when we designed the KEL-TEC SUB 2000 Aftermarket Trigger to correct all of the factory trigger problems. Don’t’ wait any longer to upgrade your trigger with much needed aftermarket performance.

KEL-TEC SUB-2000 Owners Manual & Exploded View:

If your getting the KEL-TEC SUB-2000 Target Trigger, then you might find the following KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project. Print or Download the SUB-2000 Trigger Spring Kit Instructions by MCARBO.


100% Lifetime Guarantee on Parts & Accessories:

The KEL-TEC SUB-2000 Target Trigger is protected by the MCARBO 100% Lifetime Guarantee. This means that at any time you can send it back and we will exchange it, issue a refund or assist you in any way possible.


Tested and Approved:

The KEL-TEC SUB-2000 Target Trigger has been tested with numerous brands of ammunition to ensure reliable operation and safety.


Veteran Owned and Operated Business:

American made KEL-TEC SUB-2000 Target Trigger designed and manufactured by Combat Veterans. We will donate 5% of your purchase to the Military Foundations we humbly support.


ATTENTION:

You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Installation by MCARBO is available and recommended. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without this KEL-TEC SUB-2000 Target Trigger. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

KEL TEC SUB-2000 Downloadable Resources

Q: Will this Trigger work for the Gen 1 or Gen 2?

A: Yes the KEl-TEC SUB-2000 Target Trigger will work for both the Generation 1 and Generation 2 models of the SUB-2000.

MCARBO 100% Lifetime Guarantee - This means that at any time you can send it back and we will exchange it, issue a refund or assist you in any way possible.

ATTENTION: We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon my be prohibited in your state. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that my be incurred.

Overall Customer Rating of 60 Reviews:

Target trigger

Rating:
Pros:
Cons:
Trigger bar hole milled to small $30 should have better qc still waiting for replacement but have feeling you have a bad batch and will have similar issues we will see.

Nebraska

target trigger

Rating:
Pros:
Cons:
I have just recently purchased a target trigger from M-CARBO and installed it my Marlin model 60. I had previously installed the spring kit that they sell as well. I improved the trigger pull by about half. It is the best thing I have done to this rifle. Improved accuracy and made a better rifle to shoot and enjoy. Thank you M-CARBO for great products.

Idaho

Most needed improvement to any KelTec Product

Rating:
Pros:
Cons:
It's not that the stock triggers in KelTec products don't work; it's that they don't work well. This solves the problem of fit, flex and potential breakage at the same time as improving the level of control over the trigger system. Also gives you the opportunity to get inside of the receiver and cleaning up any debris and flashing from the manufacturing and assembly process.

Rating:
Pros:
Cons:
I bought the Target Trigger and the Aluminum Trigger Guard because they looked better than the OEM parts. They were easy to install with the instructional video, but the trigger was sticking after reassembly. The troubleshooting video addressed this issue and I followed their instructions. This did not fix the sticking. I found that the holes in the target trigger were slighter smaller than the OEM trigger, not allowing the trigger to operate smoothly when the left and right grips were reassembled. A ream job on both Trigger holes with some 200 grit sandpaper on a very small bit with a drill corrected the problem. Mcarbo's R&D team is aware of the problem. The trigger guard functions as well as the OEM one but it looks much better matching the trigger.

Oregon

Love the feel

Rating:
Pros:
Cons:
Since the design of the S2K trigger system doesn't put the seat surface on the trigger, this part doesn't make a huge difference. But it feels on my trigger finger very smooth and solid. I'd buy this all over again!